2022-07-07
With the development of the times, people have higher and higher requirements for decoration, especially the shower enclosures in the bathroom, and the shower enclosures belongs to an independent bathing space, which can prevent other floors and walls of the bathroom from being drenched by water.Then, the shower enclosures installation tutorial, the steps teach you that you can install it yourself at home, let's take a look at it together.
First of all, before we install the shower enclosures, we must prepare the bathroom supplies, tools and materials used in the decoration process.
After the washbasin in the bathroom is installed, we must first conduct a water test to ensure that the water flow is smooth. However, when testing the water, it must be ensured that there is no deviation in the operation of the experiment. Once it is found that the water does not go down, it must be reinstalled.
After preparing the materials, the next step is to install the basin. Link some parts between the two to ensure that there will be no water leakage inside and at the bottom of the basin, but the basin must be kept on a horizontal line. After that, according to the distance of the basin, connect the basin to the floor drain through the hose.
The installation of the jacking pipe must be above the glass, because to find the installation place of the jacking pipe above the glass, it must be drilled in advance when drilling. After that, the fixing seat and the elbow sleeve are installed and fixed to the top of the glass.
To install the shelf, we must choose the height of the shelf according to our daily living habits and requirements. We must standardize the important position of the shelf on the wall, and then use the tightening layer nut to fix the glass. The shelf must be kept at the same level as the wall and the ground.
After testing the water in the shower enclosures, it is necessary to install it through aluminum. The first thing to do is to ensure the drilling position in the aluminum and make a mark on the wall. When drilling holes with a drilling tool, be sure to pay attention to the depth of the holes when drilling. The last step is to knock the rubber particles into the drilled holes, use screws to fix the aluminum strips to the wall, and then clamp the glass to the place where the bottom hole is drilled, and fix it with screws.
When installing the movable door, you must pay attention to the installation of hardware, and you must use high-quality hardware to prevent rust and other problems after a long time.
1. The pre-buried holes for the size of the shower room should be designed before the bathroom is renovated. The wiring leakage protection switch device should be considered before the installation of the shower enclosures to avoid rework.
2. When the pulley of the track-type shower room is loose or falling off, ask the maintenance personnel to adjust it in time to ensure the effective bearing of the pulley on the movable door, and then use a paper towel dipped in peanut oil to clean the foreign objects in the track to ensure smooth sliding;
3. Avoid hitting the movable door with force, so as not to cause the movable door to fall off.
4. Avoid contact with strong organic solvents such as benzene, paint, paint cleaner, etc. Accidental contact may cause surface softening, dissolution and other phenomena that endanger product quality. Shower Enclosures
Ebath is one of the shower enclosure manufacturers and bathroom mirrors suppliers. This website provides relevant information such as pictures of products. We provide you with a full range of picture references when shopping for goods, providing a pleasant online shopping experience!
Our mission is to provide customers with high-quality, best-selling products.
Welcome to choose Ebath - one of the shower enclosure manufacturers and bathroom mirrors suppliers.
