1. Look at tempered glass
① Check whether the glass is transparent and whether there are defects such as stray spots and bubbles.
Brief analysis: Impurity of glass materials or defects in craftsmanship will cause defects such as stray spots and bubbles in the glass, reducing the hardness and strength of the glass.
②See if there is 3c mark certification on the original glass.
Brief analysis: 3c certification is the abbreviation of China's compulsory product certification, and shower room products cannot be sold without this mark.
③Look at the sample of completely tempered glass fragments
Brief analysis: According to the national standard, the safe breaking amount of tempered glass should reach more than 40 pieces per 50*50mm area.
2. Look at the acrylic material
Acrylic sheets, it is understood that the glass filaments used in some composite acrylic sheets contain formaldehyde, which is one of the sources of toilet pollution. The way to distinguish the acrylic material is to observe the inside of the shower room. If the back of the acrylic sheet is different from the front and is rough, it is a composite acrylic sheet. For example, some acrylic panels will change color after being used for a long time, and some will have small cracks. This is also the main reason why some brands of shower rooms are expensive and others are cheap.
3. Look at aluminum
① Look at the hardness of aluminum
Brief analysis: The aluminum material of the shower room often needs to support the weight of dozens of kilograms or even hundreds of kilograms of glass. If the hardness and thickness are not good, the service life of the shower will be very short. The hardness and thickness of all aluminum materials are important assessment indicators. Qualified shower room aluminum thickness is more than 1.2mm, and the glass aluminum material on the rail needs to be more than 1.5mm. The hardness of the aluminum material can be tested by pressing the aluminum frame by hand. The aluminum material with a hardness of more than 13 degrees is difficult for adults to deform by hand pressing.
② Check whether the surface of the aluminum material is smooth, whether there is chromatic aberration and trachoma, and the surface finish.
Brief analysis: When the second-hand scrap aluminum is processed, the surface treatment is not smooth enough, there will be obvious color difference and trachoma, and the finish of the special section is dark.
4. Look at the pulley
① Look at the material of the pulley and the tightness of the wheel seat
Brief analysis: The wheel seat of the pulley should be made of compressive and heavy-duty materials, such as 304 stainless steel and high-end synthetic materials. The sealing of the wheel seat is good, the water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
② Look at the compatibility of pulleys and aluminum rails
Brief analysis: The pulley and the track should be closely matched, the gap is small, and it is not easy to fall off when it is hit by an external force, so as to avoid safety accidents.
5. Look at the adjustment function of connecting wall materials and wall clips
Brief analysis: The connecting wall material (wall clip) is the aluminum material connecting the shower room and the wall, because the inclination of the wall and the offset of the installation will cause the glass of the connecting wall to be distorted, resulting in the self-explosion of the glass. Therefore, the connecting wall material should have the vertical and horizontal adjustment function, so that the aluminum material can match the distortion of the wall and the installation, eliminate the distortion of the glass, and avoid the self-explosion of the glass.
6. Look at the stability of the pull rod of the shower room
Brief analysis: The pull rod of the shower room is an important support to ensure the stability of the frameless shower room. The hardness and strength of the pull rod are an important guarantee for the impact resistance of the shower room. It is not recommended to use a retractable pull rod, which is weak in strength.
7. Look at the water tightness of the shower room
①The connection between the shower room and the wall.
②The joint between the door and the door.
③ Water tightness at the hinge - the water tightness of the hinge is often not good because it needs to move.
④The connection between the shower room and the stone foundation and the bottom basin.
⑤ Check the sealing between the rubber strip and the rubber strip.
8: See if the product design is humanized.
Brief analysis: boutique rack, sealing magnetic strip, buffer device, whether it is easy to clean, detail processing (whether the attached cover is complete, and whether it feels smooth).
-They provide an elegant and clean look to your bathroom that is unmatched by any other type of shower door.
-Frameless doors are also much easier to keep clean since there are no places for mold or mildew to grow in the cracks and crevices.
-Another advantage of frameless doors is that they can make your small bathroom appear much larger.
-Frameless doors are also much safer than framed doors because there is no risk of the glass shattering if it is hit by something.
Frameless shower doors have many advantages over their framed counterparts.
1. Increased light transmittance
Without the metal frame, more light is able to pass through the glass, making the shower area feel more open and bright.
2. Easy to clean
Since there is no frame around the door, there are no nooks and crannies for dirt and grime to accumulate. This makes frameless doors much easier to keep clean.
3. They are stylish and can add value to your home.
4. They are durable and will last for many years.
5. They are safer than traditional shower doors because there is no risk of the glass breaking and causing injury.
Assuming you have a quality frameless sliding shower door, the best way to maintain it is to:
1. Clean it regularly with a mild soap and water solution.
2. Wipe down the door tracks with a damp cloth to remove any soap buildup or other debris.
3. Apply a silicone-based lubricant to the door tracks on a monthly basis to keep them operating smoothly.
The best way to keep your best frameless sliding shower doors clean is to prevent dirt and grime from building up in the first place.
Here are a few tips:
- Use door guards or mats to protect the bottom of the door from dirt and debris.
- Wipe down the glass after every shower with a squeegee or microfiber cloth.
- Keep a bottle of glass cleaner in the shower to help with spot cleaning.
best frameless sliding shower doors are a great addition to any bathroom. They provide an elegant look and can make your bathroom feel more spacious.